Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.
Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.
Make sure you know where your home's water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
You never want to pay for a job until it is complete, and this goes for a plumber as well. In some cases, you have to make a down payment prior to the first day of work. This is okay to do; however, don't let your plumber talk you into paying the entire cost of a job before he's finished, and never pay the whole cost before he's even begun. Agree with the plumber in advance on the job and payment.
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can't do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
You know what can cause that hammering noise, plus a lot more plumbing information. You just saved yourself a lot of money if any of those issues became unbearable or resulted in broken parts. Take time to read back over this article periodically to make sure that you are on top of your plumbing skills. Red Bluff Plumbing, Heating & Air Company
No comments:
Post a Comment